ART USB Dual Pre is a Project Series, high quality portable microphone preamplifier. ART USB Dual Pre features dual inputs/ mic pre-amps and a USB computer interface. USB Dual Pre 2-Channel Mic Preamps are ideal for tracking or recording on the move.
ART USB Dual-Pre has been designed to work over a wide variety of applications including remote field recording and desktop/studio tracking. Both of the balanced XLR/TRS 1/4"-jack input channels have up to 48 dB of clean gain with signal present and clip LED indicators.
USB Dual Pre is powered via the USB bus whilst an internal 9 Volt battery, or optional external 12V power supply (or any combination of USB, battery & power supply) can be used depending on application. When running powered by battery alone, you should expect in excess of 50 hours of operation with phantom power off. Battery life will drop to approximately 20 hours (depending on microphone) when phantom powering is engaged (still enough time to get through an average session). The built-in low noise +48 Volt phantom power supply allows you to power up to 2 microphones as well as the preamplifier when running from any power sources including the USB bus.
For monitoring, the ART USB Dual Pre Project Series has an 1/8-inch TRS mini headphone jack with level and monitor mix controls on the rear allow for latency free local monitoring of the inputs while recording as well as playback monitoring of the USB bus. The monitor mix is also routed to the 1/4-inch TRS balanced outputs. This lets you use the 1/4-inch outputs as either preamplifier outputs or as the monitor feed to your powered monitors.
ART USB Dual Pre is fully compliant with the USB 1.1 specification and uses USB adaptive mode for playback and USB asynchronous mode for record. It will work with the USB audio device drivers built into Windows 98SE/ME/2000/XP/Vista and Apple OS9.1/OSX computers with native USB support. No special drivers are needed.