Alto Professional MixPack Pro

Alto Professional MixPack Pro is the most powerful in the MIXPACK line of portable powered PA systems. Alto Professional MixPack Pro has a 15" subwoofer and two 6.5" speakers get the sound pumping in seconds behind 1000 watts of continuous pure Class AB power so you're never left wanting more. The satellites lock securely on the back side of MIXPACK Pro and the included handle and wheels make moving the whole rig no problem. Put simply, there has never been a more easy and powerful way to bring this much power to any location.

A 10-channel mixer is included with the Alto Professional MixPack Pro so you can connect everything from musical instruments to microphones to an iPod. Four simple screws can be removed allowing the mixer portion to be detached and conveniently placed into your audio rack so you don't have to bend over to make adjustments during a show. Maybe your band is gigging or you are a live sound engineer or sound contractor looking for something you can set up quickly without sacrificing quality or power, Regardless of where the performance takes you, MIXPACK Pro is easy to set up with all the right connections. Stands are included and tuck neatly within the cabinet for transport so you can get the sound where it needs to go without any hassle.

Once all your gear is connected to MIXPACK Pro, you can go to work on fine tuning for the venue with MIXPACK Pro's built-in 24-bit digital effects and 7-band graphical EQ. Effects include Hall, Room Vocal & Plate Reverb, Mono & Stereo Delay (max Delay Time 650ms) Chorus, Flanger & Reverb Modulations, Stereo Delay Chorus Rev+Delay and Rev+Chorus combinations. 256 total effects spread across 16 types with 16 variations mean that you are always ready for any room and any performance. 

Alto Professional MixPack Pro Features:

• Complete Portable PA system with FX and EQ
• 15” subwoofer and two 2x6.5” speakers with 1000W continuous rated power
• 10-channel mixer
• 24-bit DSP with 256 total effects
• 7-band EQ built-in
• Included speaker stands store conveniently within for transport

• Low Output Power: 230W RMS Class AB 
• MID-HIGH-Output Power: 120W+120W RMS Class AB
• Peak Power Ratling: 1000W Peak Maximum SPL @ 1m 119.5dB Continuous - 122.5dB Peak (calculated) 
• Frequency Response: 45Hz-20KHz @ -10dB
• Impedance: Low-Mid/High Low 4ohm - Mid/high 8ohm 
• Crossover Frequencies: Active 125Hz at 12dB/Oct - Passive 3000Hz at 12dB/Oct with Electronic Dynamic Protections
• Amplifier Protections: Low-Mid/High Soft start - Short Circuit - DC output voltage - Thermal Protection - Subsonic Filter at 30Hz - 24dB/Oct - Limiter/Compressor 
• Low Frequency Device: 15"/385mm - 2.5" Voice Coil 
• Mid Frequency Device: 4×6.5"/165mm - 1.5" Voice Coil
• High Frequency Device: 2×1"Compression Driver - 1" Voice Coil
• Hom Coverage: H° × V° 80°H × 80°V
• A/D and D/A converters: 24bit
• DSP resolution: 24bit
• Type of effects: Hall, Room, Vocal & Plate Reverbs Mono & Stereo Delay (max Delay Time 650ms) Chorus Flanger & Reverb Modulations Reverbs Stereo
  Delay Chorus Rev+Delay and Rev+Chorus combinations