DBX 231S Graphic Equalizer

DBX 231S graphic equalizer is an all new processor featuring two 31-band channels of 1/3-octave equalization. DBX 231S also features +/-12 dB input gain, switchable +/-6 dB or +/-12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface and output level metering. 231S offers an extended 10Hz to 50kHz frequency response and 112 dB dynamic range.

Loaded with quality componentry and meticulous attention to detail, 231S offers exceptional sound and rugged reliability that guarantees you will always sound your best. DBX 231s is sure to find a home in the studio, on tour and with installed sound venues, and is destined to take its rightful place in the lineage of great dbx signal processors that are the professional's choice in signal processing. With such affordable quality, there's no longer any excuse for compromising your sound.

• Dual 31-band, 1/3-octave Constant Q frequency bands
• Switchable boost/cut ranges of +/-6 or +/-12 dB
• Front panel bypass switch
• +/-12 dB input gain range
• 4-segment LED ladders for monitoring output levels
• XLR and TRS Inpts and Outputs
• Frequency Repsonse of <10Hz to >50kHz
• Dynamic range of greater than 108dB
• Input Connectors: 1/4" TRS, female XLR (pin 2 hot)
• Type: Electronically balanced/unbalanced, RF filtered
• Impedance: Balanced 40k ohm, unbalanced 20k ohm
• Max Input Level: >+21dBu balanced or unbalanced
• CMRR: >40dB, typically >55dB at 1kHz
• Output Connectors: 1/4" TRS, male XLR (pin 2 hot)
• Type: Impedance-balanaced/unbalanced, RF filtered
• Impedance: Balanced 100 ohm, unbalanced 50 ohm
• Max Output Level: >+21dBu balanced/unbalanced into 2k ohm or greater >+18dBm balanced/unbalanced (into 600 ohm)
• Bandwidth: 20Hz to 20kHz, +0.5/-1dB
• Frequency Response: <10Hz to >50kHz, +0.5/-3dB
• Dynamic Range: Typicall >112dB
• Signal-to-Noise: Typically >95dB
• THD+Noise: <0.003%
• Interchannel Crosstalk: <-90dB, 20Hz to 20kHz
• EQ Bypass Switch: Bypasses the graphic equalizer section in the signal path
• Low Cut Switch: Activates the 50Hz 12dB/octave high-pass filter
• Range Switch: Selects either +/- 6dB or +/- 12dB slider boost/cut range
• Weight: 6.2 lbs.(2.81 kg) Shipping weight 7.9 lbs.(3.58kg)
• Dimensions: 3.5" (8.9cm) H x 6"(15.24cm) D x 19" (48.26cm) W