DBX DriveRack PA+ Speaker Management System

DBX DriveRack PA+ loudspeaker management system is an easy to set-up and use all-in-one PA processor. DBX DriveRack PA Plus has exclusive dbx Set Up Wizards which walk you through system set up by simply choosing your speakers and amps from the built-in list. Drive-Rack PA+ even has an Auto EQ Wizard to help you further optimize your sound, as well as an AFS Wizard, which automatically sets filters to eliminate any feedback during performances.

Within minutes, your system will sound like it was tuned by a pro! No experience required. Get the most out of your PA with the DriveRack PA+, the worldwide standard in loudspeaker management. DBX DriveRack PA+ Features:

• Setup Wizard Steps Through Speaker and Amp Selection and Levels
• Auto EQ Wizard with 28-Band RTA Tunes Your System For The Venue
• AFS Wizard Helps Eliminate Feedback
• Stereo Feedback Elimination with 12 feedback notch filters
• dbx 120A Sub-harmonic Synthesizer
• Classic dbx Input Compression
• JBL® Speaker and Crown® Power Amp Tunings included
• USB Firmware and Speaker Tunings Field Updatable With Harman HiQnet™ System Architect
• Full time RTA function
• Front-Panel Output Mutes
• Pink Noise Generator (used with Auto EQ and Auto Level Wizards)
• Linked Stereo DSP Processing for ease of use
• 24-Bit ADC/24-Bit DAC, >113 dB Dynamic Range
• 2-Channel XLR Input and 6-Channel XLR Output
• 2x3, 2x4, 2x5, 2x6 Crossover Configurations
• Dual 28-band Graphic EQ- Linked or Dual Mono
• Stereo Multi-band Parametric EQ
• Stereo Output Limiters
• Output Alignment Delay
• Power on/off Mute Circuitry
• Front-panel RTA-M XLR input with phantom power
• 25 User Programs/25 Factory Programs
• Full Graphic LCD Display
• Front Panel Input and Output Meters

• Number of Inputs: (2) Line inputs. (1) RTA Mic input
• Connectors: (2) Female XLR line inputs, XLR RTA Mic input
• Type: Electronically balanced/RF filtered
• Impedance: > 40k ohm
• Maximum Input Level: >+20dBu
• CMRR: >45dB
• RTA Mic Phantom Voltage: +15VDC
• RTA Mic EIN:< -117dBu, 22Hz-22kHz, 150
• Number of Outputs: (6) Line Outputs
• Connectors: Male XLR
• Type: Electronically balanced, RF filtered
• Impedance: 120 ohms
• Max Output Level: +20dBu
• CMRR: >45dB
• Alignment Delay: 10ms per channel (60ms total)
• A/D Performance Type: dbx Type IV conversion system
• Dynamic Range: 110 dB A-weighted, >107 dB weighted
• Type IV dynamic range: 123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW Sample Rate:48kHz
• D/A Perfpormance Dynamic Range: 112 dB A-weighted, 110 dB unweighted
• Sample Rate: 48kHz
• Dynamic Range: 110 dB A-weighted, >107 dB weighted
• THD+N: 0.004% typical at +4 dBu, 1kHz 0 dB input gain
• Frequency Response: 20Hz - 20kHz, +/-0.5dB
• Interchannel Crosstalk: < -110 dB, -120dB typical
• Crosstalk input to output: <-100 dB
• Operating Voltage: 100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz Power Requirements25 W
• Weight: 5.5 lbs.(2.5 kg)
• Shipping weight: 7 lbs. (3.18 kg)
• Dimensions: 1.75” (4.4cm) H x 5.75”(14.6cm) D x 19” (48.26cm) W