JBL EON 210P Portable PA System

JBL EON 210P is a self-contained, portable pa system featuring multiple input channels with individual tone controls.  EON210P also has multiple digital effects and convenient output routing capabilities that allow you to use in lectures, theatre, or live sound at a gig. With its lightweight and ergonomic design the EON-210P is perfect for situations where ease and portability are just as important as quality and flexibility.

The EON210P consists of two 10-inch, two-way, powered loudspeakers, one with a detachable powered mixer and the other with a detachable storage compartment, one pair of unshielded speaker cables and a power cord. Capable of reproducing full bandwidth sound at high levels the JBL 210P is comprised of a 250 mm (10 in) woofer, a 37.5 mm (1.5 in) neodymium high frequency compression driver coupled to a 100° H by 60° V waveguide driven by a 300 watt Crown Class-D power amplifier and integrated mixer.

JBL EON 210P Features:

• 300 watt High-Performance Powered Speaker System
• Ergonomic soft touch top grip for easy handling
• 10” low-frequency driver with neodymium magnet for low-distortion and light weight
• 1” throat diameter next generation JBL neodymium compression driver
• Efficient Crown Class-D amplifier technology
• 100° H x 60° V asymmetrical wave guide for uniform audience coverage
• 8 chanel powered mixer with intuitive interface
• On board digital multi-effects
• Integrated 36 mm pole mount socket with stabilizing securing screw
• Highly designed composite enclosures for durability, lightweight, and acoustic performance

• System Power Rating: 300 Watts (2 X 150 Stereo)
• Maximum SPL Output: 124 dB peak system output (pink noise)
• Net Weight of System: 33 lbs. (19 lbs. for unit with powered mixer, 14 lbs. for unit with storage pod)
• System Type: Powered mixer with 2 two-way bass-reflex enclosures
• Frequency Range (-10 dB): 60 Hz - 20 kHz
• Frequency Response (±3 dB): 75 Hz - 19 kHz
• AC input: 120 - 240 V 50/60 Hz, voltage selector switch sets operational range
• Amplifier Design: Crown Class D
• Output Connector: 2 X 1/4” TS (unbalanced) amplifier outputs
• Input Connectors: 8 inputs (4 Mono Mic/Line, 2 X Stereo)
• Channels: 1-4 are XLR / 1/4” jack combo connectors, XLR is a mic level input, 1/4” is a line level input. 5-6, one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo). 7-8 is a 3.5 mm stereo jack
• Input Impedance: Ch 1-4 Combo: XLR 3 K Ohms Balanced; Ch 1-4 Combo: TRS 20 K Ohms Balanced; Ch 5-6: TRS 25 K Ohms Balanced; Ch 5-6: RCA 12 K Ohms Unbalanced; Ch 7-8: 3.5 mm 30 K Ohms Unbalanced
• Phantom Power: 30 V
• Output Connectors: Monitor outputs: one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo)
• Headphone output: one 3.5 mm stereo jack
• Signal Indicators: Main Output LED Ladder; Limit: Red LED indicates limiter active condition; Signal: Green LED indicates signal present
• Signal Indicators: Ch 1-4: Peak LED: Green = signal present, Red = input overload
• EQ: Individual channel Bass and Treble controls, center detent, +/-6 dB cut and boost
• System Limiter: On Board DSP Limiting and Tuning
• LF Driver: 1 x JBL 328 H 250 mm (10 in) woofer
• HF Driver: 1 x JBL 2414H-1 37.5 mm (1.5” ) annular polymer diaphragm, neodymium compression driver
• Coverage Pattern: 100º x 60º nominal
• Crossover Frequency: 2 kHz
• Crossover Type: Passive network, 2nd order filters (-12 dB per octave) for high pass and low pass filters
• Enclosure: Polypropylene
• Suspension/ Mounting: 36 mm pole socket with stabilizing screw
• Handles: One on top
• Grille: Powder coated perforated steel
• Shipping Package (HxWxD): 21.5” x 26” x 13.75” (546 mm x 660 mm x 349 mm)