Peavey IPR-1600

Peavey IPR-1600 stereo power amp is the newest in a range of power amplification from Peavey.  IPR1600 from Peavey offers great power in a leightweight (3.23kg) unit, a fantastic low price, and yet still delivering Peavey's historic quality.  What's more, Peavey's IPR 1600 fits into a 2U Rack space, so you'll have plenty of room for your Peavey signal processors in there too!

Peavey IPR1600 Features:

• 800 Watts RMS per channel into 2 Ohms, 530 Watts RMS per channel into 4 Ohms.
• Resonant switch-mode power supply with high-speed class D topology.
• Combo XLR and 1/4'' (6.35mm) input connectors.
• Combination Speakon® and Jack output connectors.
• Two independent 100 Hz crossovers.
• Variable-speed fan.
• Lightweight aluminum chassis.
• DDT™ speaker protection.
• 2U space rack.
• LED indicators for input signal, DDT™ and power.

• Rated Power (2 x 2 ohms) - 800 watts per channel @ 1 kHz at <0.1% T.H.D. both channels driven.
• Rated Power (2 x 4 ohms) - 530 watts per channel @ 1 kHz at <0.1% T.H.D. both channels driven.
• Rated Power (2 x 8 ohms) - 300 watts per channel @ 1 kHz at <0.1% T.H.D. both channels driven.
• Rated Power (1 x 2 ohms) - 1000 watts @ 1 kHz at <0.1% T.H.D.
• Rated Power (1 x 4 ohms) - 600 watts @ 1 kHz at <0.1% T.H.D.
• Rated Power (1 x 8 ohms) - 320 watts @ 1 kHz at <0.1% T.H.D.
• Minimum Load Impedance - 2 ohms
• Maximum RMS Voltage Swing - 55 volts
• Frequency Response - 10 Hz - 50 kHz; +0, -3 dB at 1 watt
• T.H.D. (2 x 2 ohms) - <0.1% @ 600 watts per channel from 20 Hz to 1.5 kHz, decreasing to 500 watts at 20 kHz at <0.25%
• T.H.D. (2 x 4 ohms) - <0.1% @ 470 watts per channel from 20 Hz to 20 kHz
• T.H.D. (2 x 8 ohms) - <0.1% @ 250 watts per channel from 20 Hz to 20 kHz
• Input CMRR - > - 60 dB @ 1 kHz
• Voltage Gain - x 60 (+35 dB)
• Crossover - 100 Hz switchable 2nd order High pass and 3rd order Low Pass per channel
• Crosstalk - > -70 dB @ 1 kHz at 100 watts power @ 4 ohms
• Hum and Noise - > -105 dB, "A" weighted referenced to rated power @ 4 ohms
• Damping Factor (8 ohms) - > 170:1 @ 20 Hz - 1 kHz at 8 ohms
• Phase Response - +9 to - 86 degrees from 20 Hz to 20kHz
• Slew Rate: - > 12V/us
• Input Sensitivity - .775 volts +/- 3% for 1 kHz 4 ohm rated power, .68 volts +/- 3% for 1 kHz. 2 ohm rated power
• Input Impedance - 15k ohms, balanced and 7.5k ohms unbalanced.
• Current Draw @ 1/8 power - 550 watts @ 2 ohms, 390 watts @ 4 ohms, 250 watts @ 8 ohms
• Current Draw @ 1/3 power -1,160 watts @ 2 ohms, 810 watts @ 4 ohms, 460 watts @ 8 ohms
• Cooling - Temperature dependent variable speed 80 mm DC fan
• Controls - 2 front panel attenuators, crossover select switch for H.P.F, Normal and L.P.F.
• Indicator LEDs - 2 DDT (clip limiting), 2 Signal presence, 2 Active status, 2 Temp and 2 DC protect
• Protection - Thermal, DC, subsonic, incorrect loads, under and over voltage
• Connectors - Inputs: Dual Combi 1/4” XLR, Outputs: Dual 1/4” signal patch, dual Speakon connectors
• Construction - 0.062” thick aluminum
• Dimensions - 3.5”x19” x 10.5” behind front panel + 0.6” for handle
• Dimensions Packed - 4.72” x20.8” x 12.44” (120mm x 530mm x 316mm)
• Net Weight* - 3.23 kg (7.125 lbs.)
• Gross Weight - 4.31 kg (9.5 lbs.)