Peavey PV14 USB Mixer is a versatile mixer that is ideal for both live sound and project studio recording applications. Peavey PV14-USB offers an extremely high specification boasting 14 channels, 10 of which are mono inputs with low noise reference quality XLR inputs with insert points. PV14USB Mono 1/4" jack sockets handle everything else. The two stereo channels each have jack and phono inputs and you can switch between them via the A/B button. This saves re-patching and allows you to leave four sources connected.
Mono channels on Peavey PV14USB have a gain control to accommodate a wide range of input levels. An 80hz roll off filter reduces the low end rumble and feedback from mics on a hollow stage and the bass, middle and treble controls each have +/- 15db of cut or boost. A pre-fade monitor control for stage or headphone monitoring and a post fade FX send adjusts the level of FX for each channel. Pan controls the left/right balance, the mute button, clip and signal LEDs give a visual indication of the signal for that channel. Smooth 60mm faders control channel volume and 48v phantom power is available from the XLRs.
The built in DSP processor on Peavey PV14 USB Mixers offers 16 different types of reverb and delay, including doubling and vocal enhancement. A further control adjusts the main parameter (reverb length / delay time, etc) for each effect. The desk outputs on XLR and balanced 1/4”jack sockets as well as a control room output, headphone socket and phono tape ins and outs.
The USB port on the rear of the Peavey PV14 USB Mixer allows two channel recording and playback of digital audio. The USB output is the stereo master mix and has a separate output record level control. It is compatible with Windows XP/ME/2000 and Mac OSX 10.0 and above. The mixer is powered from the provided IEC mains lead and a 19” rack mount kit option is available.